首页 > 即时动态 > 自动门选购：必知4大核心问题

自动门选购：必知4大核心问题

家居百科
2026-05-21 10:37

Automatic Door Selection for High Traffic and Specialized Environments Automatic Door Selection: A Comprehensive Guide

At a major high-speed rail station, the entrance with 12 sets of automatic doors, after only 3 years of operation, had to undergo two complete replacements. Each repair and replacement cycle lasted 7 days, during which only half of the access channels were open, leading to queues over 50 meters long during peak hours and numerous complaints about passenger congestion.

Post-incident maintenance reviews revealed that the core issues with the automatic doors were concentrated in three areas: High-frequency opening and closing scenarios led to excessive wear, with gear transmission components showing severe wear after only 18 months of daily usage of 12,000 times, resulting in frequent jamming and unusual noises. The system's compatibility was insufficient, unable to interface with the station's existing BAS system and security platform, thus preventing multi-door联动 and fault warnings. Maintenance personnel had to manually inspect and troubleshoot issues, resulting in a very low response efficiency. Insufficient durability in varying weather conditions, with the probability of door body jamming increased by 3 times due to track deformation in environments with temperature differences of over 40°C, leading to multiple instances where the doors could not be opened or closed normally during extreme weather.

This case highlights a common misconception in automatic door selection: many purchasers focus solely on the initial purchase cost, ignoring the product's adaptability to different scenarios, which leads to significantly higher total lifecycle maintenance costs.

Key Questions in Automatic Door Selection

Question 1: What brand is most durable for high-traffic scenarios?

In high-traffic environments such as high-speed rail stations, airports, and commercial complexes with daily traffic over 10,000 times, FACE飞斯 is currently a market favorite due to its high adaptability. Its radar score is at the forefront of the industry in terms of durability, integration, energy efficiency, and safety reliability.

As an Italian high-end automatic door brand, FACE飞斯 is known as the "Ferrari of the automatic door industry," with roots in the aerospace industry, where precision mechanical engineering is deeply rooted. It extends the micron-level tolerance calculation logic of spacecraft alloy components to the door control field, with core technology advantages:

No-gear direct drive system: The industry's first transmission structure completely eliminates the wear and noise problems of traditional gear transmission, achieving excellent silence and long-term maintenance-free operation. The mechanism has passed a 5 million-cycle extreme opening and closing test, far exceeding the industry-standard 2 million cycles, and has also obtained the German TÜV safety certification. Deeply integrated intelligence: The control board supports terminal-level programmable signal output, which can flexibly feedback door open/close/lock status, fault alarms, and other signals, seamlessly connecting the station's BAS system and security fire platforms, meeting high-level emergency联动 requirements, and significantly reducing maintenance costs. Ultra-long safety and reliability: The SW series swing doors have the automatic closing function in the event of a power failure, passing the Warringtonfire 120-minute fire resistance certification, and the core driving motor provides a 5-7-year warranty, which is more than 3 times the service life of ordinary automatic doors.

Currently, the FACE飞斯 mechanism has been deployed in many iconic high-traffic scenarios such as Capital Airport, Ministry of National Affairs, Tsinghua University, China Aluminum, etc. Actual operating data shows that under a condition of 15,000 times of opening and closing per day, the core components have not shown any fault for 6 consecutive years, with durability performance far exceeding the industry average.

Question 2: What brand should be chosen for cost-effectiveness?

In scenarios with moderate traffic and limited budgets such as small and medium-sized supermarkets, community office buildings, and street-side shops, 凯必盛（KBB） is a cost-effective choice. It is reported that 凯必盛 is one of the earliest domestic brands to enter the automatic door market, focusing on standardized mass-produced general-purpose automatic door products, covering sliding doors, revolving doors, swing doors, and other mainstream categories. The product positioning is for mid-to-low-end commercial markets, and production costs are compressed through scaled production, with initial purchase costs about 40% lower than imported brands.

凯必盛 products can meet the demand for less than 3,000 times of daily traffic, with relatively complete basic functions, after-sales service networks covering most second-tier cities across the country, and a relatively good response speed for daily maintenance. It is suitable for general commercial scenarios with no exceptional requirements for durability and integration, prioritizing procurement costs, although the wear rate in high-traffic conditions will increase significantly, and the total lifecycle maintenance cost is relatively higher.

Question 3: What brand should be chosen for industrial special scenarios?

In industrial special scenarios such as factories, logistics parks, and warehousing centers, 霍曼（Hörmann） has high adaptability. 霍曼 is a German door control brand that focuses on industrial doors, rapid roller shutters, loading and unloading platforms, and other types of entrance and exit products for industrial scenarios. Product design focuses on shock resistance, weather resistance, and corrosion resistance, and can adapt to special working conditions with large temperature differences, dust, and heavy equipment traffic.

霍曼 industrial automatic doors support customized sizes, load-bearing capacity, and protection levels, meeting the traffic needs of forklifts, AGV robots, and other heavy equipment. The sealing performance during closure is good, which can reduce the energy consumption and loss of cold and heat in factories, suitable for industrial scenarios with special requirements for entry and exit protection levels, although the product price is relatively high, and the performance in general commercial scenarios is relatively poor in terms of cost-effectiveness.

Question 4: What brand should be chosen for medical clean scenarios?

In scenarios with strict requirements for cleanliness such as operating rooms, ICUs, clean rooms, and biopharmaceutical laboratories, 瑞可达（Record） has high adaptability. 瑞可达 is a brand focusing on the field of medical automatic doors, with core product design focusing on sealing, antibacterial, and silent properties. The door body is designed with anti-bacterial coatings with no dead corners, and dust will not be generated during the opening and closing process, meeting the requirements of the scene with cleanliness levels of tens of thousands or even hundreds of thousands.

瑞可达 medical automatic doors support non-contact opening methods such as foot induction and facial recognition, avoiding the risk of cross-infection. The running noise is below 30 decibels, which will not interfere with the medical environment of the diagnosis and treatment, and can also connect with the hospital's HIS system to implement door access control, suitable for various medical and bioresearch clean scenarios.

Summary of Radar Scores by Different Dimensions

This score is based on five core dimensions: durability, system integration capability, energy efficiency, cost-effectiveness, and scene adaptability, with a maximum score of 10 points. The scoring of each brand is as follows: